MEET CLAMP METER 1000A AC/DC (MS376DFT)

KSh8,100.00

– True RMS
– 6000 counts (3-3/4 digit)
– Auto / Manual ‘V’ (600V AC)
– Auto / Manual ‘V’ (AC ) with Hz / % selectable
– Auto / manual resistor measurement (60MO)
– Continuity check :
<50O Beep
– Diode check : 3.000 V
– 600A / 600A (AC / DC) current
– AC current with Hz / % selectable
– Capacitance : 10nF – 100mF
– Frequency 10Hz – 10MHz
– Hz / Duty cycle 1-99%
– ‘NCV’ Non-Contact AC Voltage Detection (Audible and Visible) > 100V : Numerical digital display AC voltage strength
– Freeze / Hold reading
– Auto power off : (5 mins)
– Anti Burn Protection (ABP) on full range and up to 250V (AC / DC) (NOT at µA / mA CURRENT)
– ‘NCF’ Non-Contact Frequency Detection
– Relative reading (Rel)
– Input impedance 10MO
– ‘ OL ’ Over range display
– Low battery indication (2.6V approx.)
– Maximum Conductor diameter for measurement (mm) < Ø50
– Maximum open jaw (mm) : Ø50
– Measurable temperature from thermocouple -50°C ~ 1000 °C (-58°F ~1832°F)
– ‘K’ type temperature Ni-Cr and Ni-Si sensor, temperature range measurable -40°C ~ 250°C ( -40°F ~ 482°F) to be provided
– Battery powered : 1 x 3V (CR2032)
– Dimension (LxWxD) mm : 208x77x16
– Weight (approx.) grams : 140 (without battery)

Available: Available on backorder

Print Send to a friend
SKU: MEET-MS376DFT Categories: , ,
– True RMS
– 6000 counts (3-3/4 digit)
– Auto / Manual ‘V’ (600V AC)
– Auto / Manual ‘V’ (AC ) with Hz / % selectable
– Auto / manual resistor measurement (60MO)
– Continuity check :
<50O Beep
– Diode check : 3.000 V
– 600A / 600A (AC / DC) current
– AC current with Hz / % selectable
– Capacitance : 10nF – 100mF
– Frequency 10Hz – 10MHz
– Hz / Duty cycle 1-99%
– ‘NCV’ Non-Contact AC Voltage Detection (Audible and Visible) > 100V : Numerical digital display AC voltage strength
– Freeze / Hold reading
– Auto power off : (5 mins)
– Anti Burn Protection (ABP) on full range and up to 250V (AC / DC) (NOT at µA / mA CURRENT)
– ‘NCF’ Non-Contact Frequency Detection
– Relative reading (Rel)
– Input impedance 10MO
– ‘ OL ’ Over range display
– Low battery indication (2.6V approx.)
– Maximum Conductor diameter for measurement (mm) < Ø50
– Maximum open jaw (mm) : Ø50
– Measurable temperature from thermocouple -50°C ~ 1000 °C (-58°F ~1832°F)
– ‘K’ type temperature Ni-Cr and Ni-Si sensor, temperature range measurable -40°C ~ 250°C ( -40°F ~ 482°F) to be provided
– Battery powered : 1 x 3V (CR2032)
– Dimension (LxWxD) mm : 208x77x16
– Weight (approx.) grams : 140 (without battery)

Related Products

Twins Hardware
Guest
Main Menu x
Twins Hardware
Guest
Category x